000 | 01962cam a22002895i 4500 | ||
---|---|---|---|
001 | 11096 | ||
003 | IN-BhIIT | ||
005 | 20240517095749.0 | ||
008 | 210614s2021 flu 000 0 eng | ||
020 | _a9781032053035 | ||
040 | _aIN-BhIIT | ||
041 | _aeng | ||
082 |
_a629.895 _bROS/I |
||
100 | 1 |
_aRossi, Mattia, _eAuthor. _923354 |
|
245 | 1 | 0 |
_aIntroduction to microcontroller programming for power electronics control applications : _bcoding with MatlabĀ® and SimulinkĀ® / _cby Mattia Rossi, Nicola Toscani, Marco Mauri, Francesco Castelli Dezza. |
260 |
_aBoca Raton : _bCRC Press, _c2022. |
||
300 |
_axxii, 429 p. : _bill. ; _c24 cm. |
||
504 | _aIncludes bibliographical references and index. | ||
520 | _a"This introductory book focuses on the LaunchPadTM F28069M board from Texas InstrumentsTM to provide the reader some basic programming strategies specified to the field of power electronics-based control applications. Starting from simple examples such as turning on/off on-board leds or how to manage a Pulse-Width-Modulation peripheral, the reader is guided through the settings of all these dedicated SimulinkĀ® blocks enabled for code translation. Then, the book proposes several control problems in terms of power management of RL and RLC loads (e.g. DC-DC converters) and closed-loop control of DC motors. The control schemes are investigated as well as the working principles of power converter topologies needed to drive the systems under investigation. Finally, a couple of exercises are proposed to check the reader's understanding while presenting a processor-in-the loop (PIL) technique to emulate the dynamics of complex systems"-- | ||
650 | _aPower electronics. | ||
650 |
_aElectrotechnology. _922786 |
||
650 | _aMATLAB. | ||
700 | 1 |
_aToscani, Nicola, _eJoint author. _923355 |
|
700 | 1 |
_aMauri, Marco, _eJoint author. _923356 |
|
700 | 1 |
_aDezza, Francesco Castelli, _eJoint author. _923357 |
|
942 |
_cTRB _01 |
||
999 |
_c14316 _d14316 |